Collected Dotfiles
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

681 lines
21 KiB

# vim:fileencoding=utf-8:ft=conf:foldmethod=marker
touch_scroll_multiplier 6.0
#: Fonts {{{
#font_family CaskaydiaCoveNerdFontCompleteM-Regular
#bold_font CaskaydiaCoveNerdFontCompleteM-Bold
#italic_font CaskaydiaCoveNerdFontCompleteM-
#bold_italic_font CaskaydiaCoveNerdFontCompleteM-SemiBold
font_family MesloLGSDZNerdFontCompleteM-Regular
bold_font MesloLGSDZNerdFontCompleteM-Bold
italic_font MesloLGSDZNerdFontCompleteM-Italic
bold_italic_font MesloLGSDZ-Nerd-Font-Mono
font_size 9.5
adjust_line_height 0
adjust_column_width 0
symbol_map U+F303,U+F015 Symbols Nerd Font
#symbol_map U+E000-U+F8FF Symbols Nerd Font
disable_ligatures never
#: map alt+1 disable_ligatures_in active always
#: map alt+2 disable_ligatures_in all never
#: map alt+3 disable_ligatures_in tab cursor
box_drawing_scale 0.001, 1, 1.5, 2
#: }}}
#: Cursor customization {{{
cursor #00bcd4
cursor_text_color #00bcd4
cursor_shape block
cursor_blink_interval -1
cursor_stop_blinking_after 15.0
#: }}}
#: Scrollback {{{
scrollback_lines 2000
scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER
scrollback_pager_history_size 0
wheel_scroll_multiplier 5.0
#: }}}
#: Mouse {{{
mouse_hide_wait 3.0
url_color #0087bd
url_style double
open_url_modifiers kitty_mod
open_url_with default
copy_on_select yes
#: map cmd+shift+v paste_from_buffer a1
strip_trailing_spaces never
rectangle_select_modifiers ctrl+alt
terminal_select_modifiers shift
select_by_word_characters :@-./_~?&=%+#
click_interval -1.0
focus_follows_mouse no
pointer_shape_when_grabbed arrow
#: }}}
#: Performance tuning {{{
repaint_delay 8
input_delay 3
sync_to_monitor yes
#: }}}
#: Terminal bell {{{
enable_audio_bell no
visual_bell_duration 0.0
window_alert_on_bell yes
bell_on_tab yes
command_on_bell none
#: }}}
#: Window layout {{{
remember_window_size no
#initial_window_width 640
#initial_window_height 400
#: If enabled, the window size will be remembered so that new
#: instances of kitty will have the same size as the previous
#: instance. If disabled, the window will initially have size
#: configured by initial_window_width/height, in pixels. You can use a
#: suffix of "c" on the width/height values to have them interpreted
#: as number of cells instead of pixels.
enabled_layouts tall:bias=50;full_size=1;mirrored=false
#enabled_layouts *
#: The enabled window layouts. A comma separated list of layout names.
#: The special value all means all layouts. The first listed layout
#: will be used as the startup layout. For a list of available
#: layouts, see the
#: https://sw.kovidgoyal.net/kitty/index.html#layouts.
window_resize_step_cells 2
window_resize_step_lines 2
#: The step size (in units of cell width/cell height) to use when
#: resizing windows. The cells value is used for horizontal resizing
#: and the lines value for vertical resizing.
window_border_width 1.5
#: The width (in pts) of window borders. Will be rounded to the
#: nearest number of pixels based on screen resolution. Note that
#: borders are displayed only when more than one window is visible.
#: They are meant to separate multiple windows.
draw_minimal_borders yes
#: Draw only the minimum borders needed. This means that only the
#: minimum needed borders for inactive windows are drawn. That is only
#: the borders that separate the inactive window from a neighbor. Note
#: that setting a non-zero window margin overrides this and causes all
#: borders to be drawn.
window_margin_width 1.0
#: The window margin (in pts) (blank area outside the border)
single_window_margin_width -1000.0
#: The window margin (in pts) to use when only a single window is
#: visible. Negative values will cause the value of
#: window_margin_width to be used instead.
window_padding_width 0.0
#: The window padding (in pts) (blank area between the text and the
#: window border)
placement_strategy center
#: When the window size is not an exact multiple of the cell size, the
#: cell area of the terminal window will have some extra padding on
#: the sides. You can control how that padding is distributed with
#: this option. Using a value of center means the cell area will be
#: placed centrally. A value of top-left means the padding will be on
#: only the bottom and right edges.
#: The color for the border of the active window. Set this to none to
#: not draw borders around the active window.
#: The color for the border of inactive windows
bell_border_color #ff5a00
#: The color for the border of inactive windows in which a bell has
#: occurred
inactive_text_alpha 1.0
#: Fade the text in inactive windows by the specified amount (a number
#: between zero and one, with zero being fully faded).
#hide_window_decorations yes
#: Hide the window decorations (title-bar and window borders). Whether
#: this works and exactly what effect it has depends on the window
#: manager/operating system.
resize_debounce_time 0.1
#: The time (in seconds) to wait before redrawing the screen when a
#: resize event is received. On platforms such as macOS, where the
#: operating system sends events corresponding to the start and end of
#: a resize, this number is ignored.
resize_draw_strategy static
#: Choose how kitty draws a window while a resize is in progress. A
#: value of static means draw the current window contents, mostly
#: unchanged. A value of scale means draw the current window contents
#: scaled. A value of blank means draw a blank window. A value of size
#: means show the window size in cells.
#: }}}
#: Tab bar {{{
tab_bar_edge top
#: Which edge to show the tab bar on, top or bottom
tab_bar_margin_width 0.0
#: The margin to the left and right of the tab bar (in pts)
tab_bar_style powerline
#: The tab bar style, can be one of: fade, separator or hidden. In the
#: fade style, each tab's edges fade into the background color, in the
#: separator style, tabs are separated by a configurable separator.
tab_bar_min_tabs 2
#: The minimum number of tabs that must exist before the tab bar is
#: shown
tab_switch_strategy previous
#: The algorithm to use when switching to a tab when the current tab
#: is closed. The default of previous will switch to the last used
#: tab. A value of left will switch to the tab to the left of the
#: closed tab. A value of last will switch to the right-most tab.
#tab_fade 0.25 0.5 0.75 1
tab_fade 0 0.0625 0.125 0.25 0.375 0.5 0.625 0.75 0.875 1
#tab_fade 0 1 1 0
#: Control how each tab fades into the background when using fade for
#: the tab_bar_style. Each number is an alpha (between zero and one)
#: that controls how much the corresponding cell fades into the
#: background, with zero being no fade and one being full fade. You
#: can change the number of cells used by adding/removing entries to
#: this list.
tab_separator ""
#: The separator between tabs in the tab bar when using separator as
#: the tab_bar_style.
#tab_activity_symbol 
tab_title_template {title}
active_tab_title_template {title}
#tab_powerline_style slanted
#: A template to render the tab title. The default just renders the
#: title. If you wish to include the tab-index as well, use something
#: like: {index}: {title}. Useful if you have shortcuts mapped for
#: goto_tab N.
#: }}}
#: Color scheme {{{
background_opacity 0.92
#: The opacity of the background. A number between 0 and 1, where 1 is
#: opaque and 0 is fully transparent. This will only work if
#: supported by the OS (for instance, when using a compositor under
#: X11). Note that it only sets the default background color's
#: opacity. This is so that things like the status bar in vim,
#: powerline prompts, etc. still look good. But it means that if you
#: use a color theme with a background color in your editor, it will
#: not be rendered as transparent. Instead you should change the
#: default background color in your kitty config and not use a
#: background color in the editor color scheme. Or use the escape
#: codes to set the terminals default colors in a shell script to
#: launch your editor. Be aware that using a value less than 1.0 is a
#: (possibly significant) performance hit. If you want to dynamically
#: change transparency of windows set dynamic_background_opacity to
#: yes (this is off by default as it has a performance cost)
dynamic_background_opacity yes
#dim_opacity 0.95
# %%base16_template: kitty##default-256 %%
# Base16 Gruvbox dark, pale - kitty color config
# Scheme by Dawid Kurek (dawikur@gmail.com), morhetz (https://github.com/morhetz/gruvbox)
background #262626
foreground #dab997
selection_background #dab997
selection_foreground #262626
url_color #949494
cursor #dab997
active_border_color #666
inactive_border_color #444
active_tab_background #85ad85
active_tab_foreground #262626
active_tab_font_style bold
inactive_tab_font_style normal
inactive_tab_background #474747
inactive_tab_foreground #dab997
tab_bar_background #272727
# normal
color0 #262626
color1 #d75f5f
color2 #afaf00
color3 #ffaf00
color4 #85ad85
color5 #d485ad
color6 #83adad
color7 #dab997
#
# bright
color8 #8a8a8a
color9 #d75f5f
color10 #afaf00
color11 #ffaf00
color12 #83adad
color13 #d485ad
color14 #85ad85
color15 #ebdbb2
# extended base16 colors
color16 #ff8700
color17 #d65d0e
color18 #3a3a3a
color19 #4e4e4e
color20 #949494
color21 #d5c4a1
# %%base16_template_end%%
#: }}}
#: Advanced {{{
shell .
editor .
close_on_child_death no
allow_remote_control yes
update_check_interval 0
startup_session none
clipboard_control write-clipboard write-primary read-clipboard read-primary
term xterm-kitty
#: }}}
#: Keyboard shortcuts {{{
#: For a list of key names, see: GLFW keys
#: <https://www.glfw.org/docs/latest/group__keys.html>. The name to
#: use is the part after the GLFW_KEY_ prefix. For a list of modifier
#: names, see: GLFW mods
#: <https://www.glfw.org/docs/latest/group__mods.html>
#: On Linux you can also use XKB key names to bind keys that are not
#: supported by GLFW. See XKB keys
#: <https://github.com/xkbcommon/libxkbcommon/blob/master/xkbcommon/xkbcommon-
#: keysyms.h> for a list of key names. The name to use is the part
#: after the XKB_KEY_ prefix. Note that you should only use an XKB key
#: name for keys that are not present in the list of GLFW keys.
#: Finally, you can use raw system key codes to map keys. To see the
#: system key code for a key, start kitty with the kitty --debug-
#: keyboard option. Then kitty will output some debug text for every
#: key event. In that text look for ``native_code`` the value of that
#: becomes the key name in the shortcut. For example:
#: .. code-block:: none
#: on_key_input: glfw key: 65 native_code: 0x61 action: PRESS mods: 0x0 text: 'a'
#: Here, the key name for the A key is 0x61 and you can use it with::
#: map ctrl+0x61 something
#: to map ctrl+a to something.
#: You can use the special action no_op to unmap a keyboard shortcut
#: that is assigned in the default configuration::
#: map kitty_mod+space no_op
#: You can combine multiple actions to be triggered by a single
#: shortcut, using the syntax below::
#: map key combine <separator> action1 <separator> action2 <separator> action3 ...
#: For example::
#: map kitty_mod+e combine : new_window : next_layout
#: this will create a new window and switch to the next available
#: layout
#: You can use multi-key shortcuts using the syntax shown below::
#: map key1>key2>key3 action
#: For example::
#: map ctrl+f>2 set_font_size 20
kitty_mod ctrl+shift
#: The value of kitty_mod is used as the modifier for all default
#: shortcuts, you can change it in your kitty.conf to change the
#: modifiers for all the default shortcuts.
clear_all_shortcuts no
#: You can have kitty remove all shortcut definition seen up to this
#: point. Useful, for instance, to remove the default shortcuts.
# kitten_alias hints hints --hints-offset=0
#: You can create aliases for kitten names, this allows overriding the
#: defaults for kitten options and can also be used to shorten
#: repeated mappings of the same kitten with a specific group of
#: options. For example, the above alias changes the default value of
#: kitty +kitten hints --hints-offset to zero for all mappings,
#: including the builtin ones.
#: Clipboard {{{
map kitty_mod+c copy_to_clipboard
#: There is also a copy_or_interrupt action that can be optionally
#: mapped to Ctrl+c. It will copy only if there is a selection and
#: send an interrupt otherwise.
map kitty_mod+v paste_from_clipboard
map kitty_mod+s paste_from_selection
map shift+insert paste_from_selection
map kitty_mod+o pass_selection_to_program
#: You can also pass the contents of the current selection to any
#: program using pass_selection_to_program. By default, the system's
#: open program is used, but you can specify your own, the selection
#: will be passed as a command line argument to the program, for
#: example::
#: map kitty_mod+o pass_selection_to_program firefox
#: You can pass the current selection to a terminal program running in
#: a new kitty window, by using the @selection placeholder::
#: map kitty_mod+y new_window less @selection
#: }}}
#: Scrolling {{{
map kitty_mod+up scroll_line_up
map kitty_mod+k scroll_line_up
map kitty_mod+down scroll_line_down
map kitty_mod+j scroll_line_down
map kitty_mod+page_up scroll_page_up
map kitty_mod+page_down scroll_page_down
map kitty_mod+home scroll_home
map kitty_mod+end scroll_end
map kitty_mod+h show_scrollback
#: You can pipe the contents of the current screen + history buffer as
#: STDIN to an arbitrary program using the ``pipe`` function. For
#: example, the following opens the scrollback buffer in less in an
#: overlay window::
#: map f1 pipe @ansi overlay less +G -R
#: For more details on piping screen and buffer contents to external
#: programs, see pipe.
#: }}}
#: Window management {{{
map kitty_mod+enter new_window
#: You can open a new window running an arbitrary program, for
#: example::
#: map kitty_mod+y new_window mutt
#: You can open a new window with the current working directory set to
#: the working directory of the current window using::
#: map ctrl+alt+enter new_window_with_cwd
#: You can open a new window that is allowed to control kitty via the
#: kitty remote control facility by prefixing the command line with @.
#: Any programs running in that window will be allowed to control
#: kitty. For example::
#: map ctrl+enter new_window @ some_program
#: You can open a new window next to the currently active window or as
#: the first window, with::
#: map ctrl+n new_window !neighbor some_program
#: map ctrl+f new_window !first some_program
map kitty_mod+n new_os_window
#: Works like new_window above, except that it opens a top level OS
#: kitty window. In particular you can use new_os_window_with_cwd to
#: open a window with the current working directory.
map kitty_mod+w close_window
map kitty_mod+] next_window
map kitty_mod+[ previous_window
map kitty_mod+f move_window_forward
map kitty_mod+b move_window_backward
map kitty_mod+` move_window_to_top
map kitty_mod+r start_resizing_window
map kitty_mod+1 first_window
map kitty_mod+2 second_window
map kitty_mod+3 third_window
map kitty_mod+4 fourth_window
map kitty_mod+5 fifth_window
map kitty_mod+6 sixth_window
map kitty_mod+7 seventh_window
map kitty_mod+8 eighth_window
map kitty_mod+9 ninth_window
map kitty_mod+0 tenth_window
#: }}}
#: Tab management {{{
map kitty_mod+right next_tab
map kitty_mod+left previous_tab
map kitty_mod+t new_tab
map kitty_mod+q close_tab
map kitty_mod+. move_tab_forward
map kitty_mod+, move_tab_backward
map kitty_mod+alt+t set_tab_title
#: You can also create shortcuts to go to specific tabs, with 1 being
#: the first tab, 2 the second tab and -1 being the previously active
#: tab::
#: map ctrl+alt+1 goto_tab 1
#: map ctrl+alt+2 goto_tab 2
#: Just as with new_window above, you can also pass the name of
#: arbitrary commands to run when using new_tab and use
#: new_tab_with_cwd. Finally, if you want the new tab to open next to
#: the current tab rather than at the end of the tabs list, use::
#: map ctrl+t new_tab !neighbor [optional cmd to run]
#: }}}
#: Layout management {{{
map kitty_mod+l next_layout
#: You can also create shortcuts to switch to specific layouts::
#: map ctrl+alt+t goto_layout tall
#: map ctrl+alt+s goto_layout stack
#: Similarly, to switch back to the previous layout::
#map F5 launch --location=hsplit
#map F6 launch --location=vsplit
#map F7 layout_action rotate
map shift+up move_window up
map shift+left move_window left
map shift+right move_window right
map shift+down move_window down
map ctrl+left neighboring_window left
map ctrl+right neighboring_window right
map ctrl+up neighboring_window up
map ctrl+down neighboring_window down
#: map ctrl+alt+p last_used_layout
#: }}}
#: Font sizes {{{
#: You can change the font size for all top-level kitty OS windows at
#: a time or only the current one.
map kitty_mod+equal change_font_size all +2.0
map kitty_mod+minus change_font_size all -2.0
map kitty_mod+backspace change_font_size all 0
#: To setup shortcuts for specific font sizes::
#: map kitty_mod+f6 change_font_size all 10.0
#: To setup shortcuts to change only the current OS window's font
#: size::
#: map kitty_mod+f6 change_font_size current 10.0
#: }}}
#: Select and act on visible text {{{
#: Use the hints kitten to select text and either pass it to an
#: external program or insert it into the terminal or copy it to the
#: clipboard.
map kitty_mod+e kitten hints
#: Open a currently visible URL using the keyboard. The program used
#: to open the URL is specified in open_url_with.
map kitty_mod+p>f kitten hints --type path --program -
#: Select a path/filename and insert it into the terminal. Useful, for
#: instance to run git commands on a filename output from a previous
#: git command.
map kitty_mod+p>shift+f kitten hints --type path
#: Select a path/filename and open it with the default open program.
map kitty_mod+p>l kitten hints --type line --program -
#: Select a line of text and insert it into the terminal. Use for the
#: output of things like: ls -1
map kitty_mod+p>w kitten hints --type word --program -
#: Select words and insert into terminal.
map kitty_mod+p>h kitten hints --type hash --program -
#: Select something that looks like a hash and insert it into the
#: terminal. Useful with git, which uses sha1 hashes to identify
#: commits
#: The hints kitten has many more modes of operation that you can map
#: to different shortcuts. For a full description see kittens/hints.
#: }}}
#: Miscellaneous {{{
map Alt+Insert kitten grab1.py
map kitty_mod+f11 toggle_fullscreen
map kitty_mod+f10 toggle_maximized
map kitty_mod+u kitten unicode_input
map kitty_mod+f2 edit_config_file
map kitty_mod+escape kitty_shell window
#: Open the kitty shell in a new window/tab/overlay/os_window to
#: control kitty using commands.
map kitty_mod+a>m set_background_opacity +0.1
map kitty_mod+a>l set_background_opacity -0.1
map kitty_mod+a>1 set_background_opacity 1
map kitty_mod+a>d set_background_opacity default
map kitty_mod+delete clear_terminal reset active
#: You can create shortcuts to clear/reset the terminal. For example::
#: # Reset the terminal
#: map kitty_mod+f9 clear_terminal reset active
#: # Clear the terminal screen by erasing all contents
#: map kitty_mod+f10 clear_terminal clear active
#: # Clear the terminal scrollback by erasing it
#: map kitty_mod+f11 clear_terminal scrollback active
#: # Scroll the contents of the screen into the scrollback
#: map kitty_mod+f12 clear_terminal scroll active
#: If you want to operate on all windows instead of just the current
#: one, use all instead of active.
#: It is also possible to remap Ctrl+L to both scroll the current
#: screen contents into the scrollback buffer and clear the screen,
#: instead of just clearing the screen::
#: map ctrl+l combine : clear_terminal scroll active : send_text normal,application \x0c
#: You can tell kitty to send arbitrary (UTF-8) encoded text to the
#: client program when pressing specified shortcut keys. For example::
#: map ctrl+alt+a send_text all Special text
#: This will send "Special text" when you press the ctrl+alt+a key
#: combination. The text to be sent is a python string literal so you
#: can use escapes like \x1b to send control codes or \u21fb to send
#: unicode characters (or you can just input the unicode characters
#: directly as UTF-8 text). The first argument to send_text is the
#: keyboard modes in which to activate the shortcut. The possible
#: values are normal or application or kitty or a comma separated
#: combination of them. The special keyword all means all modes. The
#: modes normal and application refer to the DECCKM cursor key mode
#: for terminals, and kitty refers to the special kitty extended
#: keyboard protocol.
#: Another example, that outputs a word and then moves the cursor to
#: the start of the line (same as pressing the Home key)::
#: map ctrl+alt+a send_text normal Word\x1b[H
#: map ctrl+alt+a send_text application Word\x1bOH
#: }}}
# }}}